| Model | THFWJ-001 | ||
|
Equipment introduction and parameters |
Filter loader |
Lifting mechanism: driven by servo motor, screw module drive,so that the filter mechanism stops at a precise height. According to the height of the riser from the bottom mold provided by the customer,the filter loader can automatically place a variety of molds within the stroke range.Net operation.Height adjustment can also be used to avoid interference between the running track and the equipment. Lifting stroke 250mm. | |
| Rotating mechanism: Driven by a servo motor to rotate the filter mechanism to a precise position,such as picking,centering,standby,detection and placing.The rotation angle is 120° | |||
| Adjustment mechanism:Manually adjust the distance between the filter mechanism and the riser,only need to be adjusted when the device is used for the first time.Adjust the stroke ±30mm. | |||
| Detection mechanism:driven by the cylinder.When the detection mechanism reaches the riser,the cylinder is extended.If the riser is blocked,the in-position signal cannot be returned,and the alarm will be immediately notified to the personnel for processing.Whether this mechanism is used can be set on the touch screen. | |||
| Filter placing:the cylinder drives the high-strength and high temperature resistant magnet to reciprocate.When the magnet is close to the filter screen, the filter screen is sucked;when the magnet is away from the filter screen,the filter screen is released to realize the filter screen pick and place function. | |||
|
Division plate |
Rotating table:driven by stepper motor and harmonic reducer,accurate division,so that the filter screen can be rotated accurately to the position of taking the screen.There are 20 filter screen positions in the inner and outer ring, which can be customized according to the customer's filter size.Rotation angle 18°/time | ||
| Switching mechanism: driven by the air cylinder to switch the filter position of the inner and outer ring, so that the filter loader can pick up the filter of the inner and outer ring. | |||
|
Detection mechanism |
detect whether there is a filter on the table and whether the filter is normally taken out by the filter loader.If there is no filter on the table, it will immediately alarm and notify personnel to add the filter;if the filter taken by the screening machine is detected to drop, the screen will be taken again. | ||
|
Centering mechanism |
the cylinder drives four filter screens to clamp the filter, so that the filter and the screen setting mechanism are located in the same center,increasing the accuracy and success rate of placing. | ||
|
Protective fence |
It is composed of aluminum structure and protective net, the purpose is to isolate the possible contact between the personnel and the rotary mechanism of the dial, it is also to isolate the personnel from touching the detection signal by mistake,causing the system to misjudge.The protective fence is customized according to the site space. | ||
|
Control system |
Adopts wiron touch screen,which makes man-machine communication more convenient.Different parameters can be set and recorded on the screen for quick retrieval in case of repeated use.PLC is Siemens 1200 series, dealing with servo motor, cylinder,testing and other execution and testing components. | ||
| Characteristic | It can be customized according to the on-site casting machine.The circular arc telescopic structure saves space;multi-axis servo control and precise positioning. | ||
