|
Mode |
THDYJ-A21/16A1500 |
THDYJ-A21/16A3000 |
|
Mold Connection Specification |
Upper Column Spacing:1800*2100mm、2300*2950mm |
|
|
Opening and closing mold distance:600*2400mm、600*3100mm |
||
|
Upper mold moveable plate(length*width*thickness):2100*1600*140mm |
||
|
Holding Furnace Capacity |
1500kg |
3000kg |
|
Entier Ans EitMoceofHtddingFumce/Qunty of Rser Tte |
Holding furnace can rise and fall vertically and enter and exit back and forth 11-12 pcs (optional) |
|
|
Filling Contro |
PID method for high pression filling control with either proportional valve or digital valve block |
|
|
Mold Cooling |
1.Glass flowmeter 2.Digital flowmeter 3.Digital flowmeter+Proportionate valve control 4.1-96 cooling circuits (optional)5.Brand:SMC,KEYENCE,IFM,BURKERT |
|
|
Hydraulic System |
Adopt servo hydraulic drive,“Parker"servo vane pump,“PHASE”Servo Motor |
|
|
Electric System |
SIEMENS S7-1500+HM |
|
|
Certificate |
Compliance with ISO mechanical IEC,electrical standards and CE certification |
|
|
Characteristic |
1.Fully automatic cycle 2.Optional full automatic robot operation 3.Automatic fast mold changeover device 4.Riser tube number is variable |
|
