|
Model |
THDYJ |
|
|
Mold Connection Specification |
Upper Column Spacing:1200*1600mm、1600*1800mm |
|
|
Opening and closing mold distance:600-2200mm |
||
|
Distance between side mold oil cylinder center and bottom mold plate:150mm-300mm |
||
|
Upper mold moveable plate (length*width*thickness):1950*1450*120mm |
||
|
Opening and closing mold size of side core:Min 900/1000mm;Max 1700/1800mm |
||
|
Holding Furnace Capacity |
800kg、1300kg |
|
|
Side Core Installation Angle |
Side Core can be installed at 90° |
|
|
Enter and Ext Mcde of HoHing Fumce/Quenlity of Riser Tube |
Holding furnace can rise and fall vertically and enter and exit back and forth/1-3 pcs (optional ) |
|
|
Filling Contro |
PID method for high pression filling control with either proportional valve or digital valve block |
|
|
Mold Cooling |
1.Glass flowmeter 2.Digital flowmeter 3.Digital flowmeter+Proportionate valve contro 4.1-96 cooling circuits (optional) 5.Brand:SMC,KEYENCE,IFM,BURKERT |
|
|
Hydraulic System |
Adopt servo hydraulic drive,"Parker"servo vane pump,"PHASE"Servo Motor |
|
|
Electric System |
SIEMENS S7-1500+HMI |
|
|
Certificate |
Compliance with ISO mechanical IEC,electrical standards and CE certification |
|
|
Characteristic |
1.Fully automatic cycle 2.The robot can automatically put the filter screen and pick up the pieces 3.The accumulator maintains pressure and speeds up,reducingpower consumption |
|
